Pages

Showing posts with label Sequins. Show all posts
Showing posts with label Sequins. Show all posts

Earthy Mantis Card


Hey Everyone! Justin here, and I am buzzing with excitement to share today's project, which uses the adorable Praying Mantis from the new Buggy for Caffeine set!

I wanted to do something that had a lot of earthy tones, so I knew it was time to break out some kraft cardstock!

First, as always, I colored up my Praying Mantis with alcohol markers and fussy cut them out. Next, I used some glossy accents to give the Praying Mantis's eye pop and a little shine! I set my bug aside to dry.

Next, I took a 4.125" x 5.375" piece of kraft cardstock and placed the Diamond Flower Stencil over top. I took 3 shades of an earthy green ink and blended them onto the cardstock to give them a light to dark ombré. I then took this panel and mounted it onto an A2-sized piece of grassy colored cardstock.

I also wanted to create a striped piece out of cardstock as well. So I cut (3) strips of light green cardstock and (2) strips of that grassy green cardstock, all cut at .25" x 4.25". I took a piece of kraft cardstock and carefully adhered each of the strips in a careful pattern to create almost a striped banner. I placed this going horizontally across the center of the card.

I could now begin to finish up my card. I adhered my Mantis onto a piece of dark green paper, and fussy cut them out so they had a little bit of a dark green frame. I also stamped the sentiment "#deadbeforecaffeine" in green ink onto kraft cardstock, framed it in light green cardstock and cut it into a strip. I adhered my mantis and sentiment with foam tape, and some sequins. I adhered my whole panel onto an A2-sized card base and I was finished!

The products I used in this card are:



For more inspiration with your The Rabbit Hole Designs Creations, be sure to follow along at these other locations:


For more details about products used in this post, you may also follow along at my personal blog, Just a Note by Justin, as well!

I hope you're loving these new critters and are finding some amazing inspiration for your next crafty project!

Happy Crafting!

Love is Never Wrong Card

Hey Everyone! Justin here and today I am sharing a fun project using the new Affirmation set and Tattoo Icons stencil, part of the Rabbit Hole Designs April 2020 Release!

What I love the most about the Affirmation stamp set is that there are so many possibly sentiment options. You can either use words on their own, or build them together with other sentiments. For this project, the sentiments "love" and "is never wrong" spoke to me the most. I also decided it was definitely time to break out a rainbow color palette (again).

I knew I wanted to use the swallow with the flower image from the Affirmation set for this project. I stamped that image and colored the image with my alcohol markers. I colored the feathers in the wings with a rainbow palette, and colored the main bird itself a very light blue. I then fussy cut out my rainbow bird.

I also took the sentiments "love" and "is never wrong" and heat embossed them in white powder on a black cardstock strip. I set my sentiment strip and bird aside to work on the main panel of the project.

First, I ink blend a rainbow ombré with my inks on a 4.125" x 5.375" panel of white cardstock. I spritzed this with some water and set it aside to dry.

When the panel was entirely dry, I took my Tattoo Icons stencil, and used full-adhesive backed post-its to adhere my rainbow panel to my stencil.

Tip: I don't always use a low tack adhesive spray on my stencils when applying an ink or glitter layer. I usually take into account if there are fine lines in the stencil that are difficult to keep in place. If there are fine lines, I spray. If no fine lines, I usually tape it down.

Next, I took a clear glitter gel and applied a thin, but solid layer, on top of the stencil. I carefully peeled the stencil off, had that "ah ha" moment of when a stencil comes off perfectly, and set it aside to dry in an undisturbed location. I always let glitter gels dry for at least a good half hour so that I don't have any accidental smears or smudges.

I was in the home stretch with my project. Once my glitter gel panel was dry, I adhered it to an A2-sized panel of black cardstock. I took my sentiment strip, adhered the swallow image to it, put foam tape on the back, and adhered it to my card. I finished off by adhering some sequins and mounting the card to an A2 card base.

And that's how I made my card!

I used the following products on this card:



For more inspiration with your The Rabbit Hole Designs Creations, be sure to follow along at these other locations:


For more details about products used in this post, you may also follow along at my personal blog, Just a Note by Justin, as well!

I hope you're loving these projects with the new Old School style tattoos and stencils, and that you're finding some great inspiration!

Hoppy Easter Egg Card


Hey Everyone! Justin here, and today I am sharing a fun Easter card that I made using the new All Ears set, part of the March 2020 release and available now!

There are so many fun ways to use these adorable little bunnies, and, for this project, I decided to only use 4 of them!

First, I stamped out my bunny pile from All Ears and colored up 4 bunnies from the bottom row (starting at the bottom left bunny and working my way over) with my warm gray alcohol markers. I then fussy cut the bunnies out so there is no border.

To create my Easter egg background, I cut (2) 4.125" x 5.375" panels from white cardstock, once of which also had an Easter egg cut out from the center. I laid the Easter egg cut-out piece on top of the no-cut-out piece, and taped them together with a few pieces of purple tape for stability while stenciling. Then, I put the Candy Twist Stencil on top of the attached panels and ink-blended a pastel ombré. After I was done blending, I removed the stencil (you know, that moment that perfectly emotes the emoji that has hearts for eyes). Before removing my Easter egg cut-out piece, I splattered the inked area with some sparkle silk for extra shimmer. I removed my Easter egg cut-out piece and let my panel set aside to dry.

From here, the card became fairly easy to put together. After the Easter egg panel dried, I adhered it to an A2-sized piece of light blue cardstock. I stamped the sentiment "Hoppy Easter" from All Ears on a .5" high sentiment strip, and framed that with some light pink cardstock. I placed my 4 little bunnies from All Ears into a position where it looked like they were over hanging the strip, and covered the back of my bunnies and strip with some foam tape, and adhered the piece to my card.

I then took some sequins from one of the packs I received when ordering from The Rabbit Hole Designs that had a pearly pastel palette, and adhered them to my card.

I adhered my panel to an A2-sized card base and I was done!

Here are the products I used to make my project:

All Ears


Candy Twist Stencil


For more inspiration with your The Rabbit Hole Designs Creations, be sure to follow along at these other locations:


For more details about products used in this post, you may also follow along at my personal blog, Just a Note by Justin, as well!

I hope this card is providing you with some fun ideas with how to make some adorable Easter cards or just fun bunny cards in general! Thanks for stopping by the Rabbit Hole Designs blog!

There is Nobunny Like You by Niccole

Hello everyone!


It's Niccole from Nic & Viv Designs back again to share another card I made using one of The Rabbit Hole Designs stamp sets.

For today's card I used the All Ears stamp set.



How to create this card:
  • 4.25x5.5 pinnk card base
  • A white piece of card stock cut to 4x5.25 glued to the pink piece
  • Stamped my bunny image to the white piece
  • Colored my bunnies with Copic markers
  • Added my sentiment to a pink piece of paper 
  • Applied sentiment with two layers of foam tape
  • Finished by applying sequins to card randomly
Here is one more picture of the full card ...


TRHD products used:

For more inspiration, updates, and news make sure to check out these places:


I have had so much fun playing with the All Ears stamp set.

Thank you so much for stopping by and spending some time with me.

Until next time ... Hugs & inky fingers! -Nic-

Whoooo Needs Coffee???


Hello & welcome!!

I have always loved Owls, and the Caffeinated Owl is one of my favorite critters! I started my card by masking off a 2-ish inch section on my card base and ink blended some distress oxides in a nice fall palette. I watercolored the owl using my Zig markers. Isn't he cute and under-caffeinated?? There is a coordinating die that can be used to cut him out, but I used my scan n' cut. Then the card was easily finished by mounting the owl with some foam tape and it was done!!

I am so excited for you to accompany us as we join up with the Coffee Loving Cardmakers for their Fall/Winter Coffee Lovers Blog Hop. I am joining in as part of The Rabbit Hole Designs. This is our second time joining them and we are happy to announce we are Super Sponsors for this event. For the duration of the Coffee Lovers Blog Hop, The Rabbit Hole Designs will be offering specials ...


SPECIALS WE ARE OFFERING FOR THE DURATION OF THE HOP: 15% off everything in the Caffeinated section of the shop.
Use Code: FallBrew
You can shop for all of the Caffeinated Critters HERE


Make sure you come back tomorrow to see Charmaine sharing more Caffeinated Critters. Make sure you also head over to CLC Fall/Winter Blog Hop to link up to win some awesome prizes. The hop goes through November 8th.



That wraps up my post for today, I will be back next week for another trip down The Rabbit Hole!  Until then you can find me over on my blog, Caffeinated Craftiness or over on Instagram
-Shanna


For even more inspiration, updates, and news make sure to check out these links.


Mermaid Shaker Tag


Good morning Rabbit Hole fans!
It's Lisa on the blog with you today and I have a super sparkly 
Mermaid shaker tag for you today using the Mermaid Hair stamp set!
This is one of my favorite stamp sets so far, I just love mermaids and anything
sparkly! I also added in some fun Rabbit Hole sequins that come as free gifts
with your orders.  The colors were my inspiration for this card.
I just love the blue and purple colors together for mermaid cards!
I made the background of my tag out of vellum so you could really 
appreciate the sequins! I also stamped 2 of the fish images from the 
Mermaid Hair stamp set in the background for a little extra fun!
Here is another pic with all of the Rabbit Hole supplies used.



Thanks for stopping by today and make sure to stop by The Rabbit Hole Design's blog
 each day to see more projects from the fabulous design team!

For even more inspiration, updates, and news make sure to check out these links.

Have a great day, I already am!
🧜🏻‍♀️Lisa 🧜🏻‍♀️