Pages

Merry and Bright Holly

Hello friends! Welcome back to the blog. Today's card features the 1 Line Holly 2x6 stamp set. 



Card details:
  • Stamp the holly image from the 1 Line Holly 2x6 stamp set with an alcohol-friendly black ink a white A2 vertical cardstock panel. Rotate the panel 180 degrees and stamp the image again. Color the image with alcohol markers.
  • Tape the 3 frames from the You've Been Framed die set together (nested within each other). Die cut with green cardstock to create frames and cut them into strips. Adhere the green strips onto a red cardstock panel. Adhere the red panel onto the bottom of the white A2 panel.
  • Stamp the "Merry and Bright" sentiment from the Poinsettia & Pinecones 6x8 stamp set directly onto the white panel.
  • Adhere entire panel to an A2 sized card base.


Thanks for visiting!

Amrita

You can find me on IG @amritapettus

For more inspiration, updates, and news check out these awesome places! 


The RHD Affiliate Disclaimer:

We want to ensure transparency and honesty in our interactions with you, our valued readers. Please be aware that the links provided on The Rabbit Hole Designs Blog may be affiliate links. This means that if you make a purchase through these links, the project designer may earn a small commission at no extra cost to you. Your support means the world to us!



We kindly request that you accept the tracking cookie for the affiliate websites. Rest assured, this will not expose your computer to viruses or compromise your information. It's a necessary step for the company to attribute the sale to the affiliate, ensuring that creators like our creatives receive their rightful commissions.


Your trust and support empower our creators to continue sharing creativity and inspiration through our blog. Thank you for being an integral part of The Rabbit Hole Designs community!








By at No comments:
Labels: , ,

Merry Christmas, Reindeer Style!

Hi friends! Carrianne here sharing a festive duo, lighting up the night with holiday spirit featuring The Rabbit Hole Designs 1 Line Reindeer Stamp Set.


I began with a panel of white cardstock, placed the Candy Twist Stencil, and secured it with masking tape. I blended Picked Raspberry Distress Oxide ink then cut it with the largest frame from the You've Been Framed Layering Dies. It was then attached to a red card base.


I then stamped the images from the 1 Line Reindeer Stamp Set and colored them with alcohol markers. I fussy cut the images and adhered them to the panel with foam tape for dimension. The sentiment is from the same set and was directly stamped onto the panel with black ink. I finished the card by adding a few red sequins. 


Thank you for stopping by and have a DEER-lightful day!

~ Carrianne ~



For more inspiration, news, and updates, make sure to check out these places.





DISCLOSURE: THIS POST CONTAINS AFFILIATE LINKS, MEANING I GET A SMALL COMMISSION WHEN A PURCHASE IS MADE THROUGH THAT LINK AT NO ADDITIONAL COST TO YOU. THANK YOU FOR SUPPORTING ME SO THAT I MAY CONTINUE TO SHARE MY CREATIONS WITH YOU!



By at No comments:
Labels: , , ,

Adorable Snowmen Card!

 


I used these adorable snowman images from the Warm & Cozy stamp set to create my clean and simple card. 

I stamped colored and die cut the images then created soft snowy hills for them to sit on.

You can watch me create my card in this short on my YT channel:


I've linked products I used, below. Thanks for watching!

*Disclosure: I use affiliate links where I can. This does not add any extra cost to you, but I do receive a small amount which helps keep me creating. Thank You*

Warm and Cozy stamp set: https://shrsl.com/44j8k Warm and Cozy die set: https://shrsl.com/44j8o

Cottontail Blending Brush: https://shrsl.com/3htkd

You can follow me at these places:

TikTok: Queenlore Creations (@lauren_zertuche) | TikTok


By at No comments:
Labels: , , , , , , ,

Deer Santa... Sweet Cookie Card

 

Hello crafty friends,  Jenn here with sweet treat of a card for you using The Rabbit Hole Designs' 1 Line Reindeer stamp set and making them into cookies for Santa.  I also added a sentiment from the Bunny Christmas stamp and die set.

Make sure to take advantage of the BLACK FRIDAY and CYBER MONDAY sales at The Rabbit Hole Designs!  
Sales are from 11/27/2024 through 12/02/2024 11:59pm PST  (No Codes Needed)
Use Code Jenn at check out to share you saw this sale on today's blog!
Let's take a look at this easy step tutorial:
A & B - I stamped out the 1 Line Reindeer using brown ink on light brown cardstock and colored three of them with OLO Markers

C & D - I die cut three 2 1/2" circles from kraft cardstock and shaded the edges using a Bitty Blending Brush and Gathered Twigs Distress Oxide ink to look like a baked cookies
E & F - I die cut three 2 1/4" white cardstock circles to use as frosting on the cookies.  I softly recut the edges to give it a slight wave for more of a hand-iced  look.  I added shadowing with OLO Markers BV2.0 and BV2.2   I fussy cut the reindeer heads and glued them down on the white frosting circles.  I glued these on top of each cookie

G - To create the cookie plate, I die cut a 5" circle with a 4" circle centered inside from a piece of double sided winter printed cardstock in my stash

H - The circle card base is die cut from a piece of folded kraft cardstock and a 5 1/4" circle leaving 1 1/4" of the fold intact as shown in the photo
I & J -  I opened up the circle card base and glued the outer plate circle centering it on one side of the card base.  I truned over the middle circle for the plate and glued it to the center

K - I glued one cookie to the plate and attached the second cookie with adhesive foam squares.  The third cookie has a  bite taken out of it.  I uses a circle die form my stash that has a zig zag decorating the edge and die cut a bit out of the third cookie.  The bitten cookie is attached to the card  with two layers of foam tape.

L - I stamped out the Jolly Holly-Days to you using a sentiment from the Bunny Christmas stamp and die bundle.  I cut out the sentiment and added it above the cookies on the plate to complete the Deer Santa cookie card.

Supply List

Other Supplies (from your stash)
OLO Markers
Gathered Twig Distress Oxide
Circle Nesting Dies

Be sure to check out The Rabbit Hole Designs for the BLACK FRIDAY Specials
Use the code Jenn at check out to let us know you saw this post!

Thank you, I appreciate you taking time from your day to stop by and check out today's blog featuring The Rabbit Hole Designs stamps and dies. I hope you are inspired to create something lovely today!

Be Creative ~ Stay Inspired
Jenn Gross

Follow me, Journey Coach Jenn, on 
Instagram - https://www.instagram.com/journeycoachjenn/
YouTube - http://www.youtube.com/c/JourneyCoachJenn
Blog - https://journeycoachjenn.blogspot.com

For more inspiration, updates, and news make sure to check out these places 

By at No comments:
Labels: , , , , , , , , , , ,

Your Flaky Friend

Hello friends! Welcome back to the blog. Today's card features the 1 Line Snowperson 2x6 stamp set. This small but mighty stamp set creates a lovely one-layer card with just a bit of masking.



Card details:
  • Stamp the image from the 1 Line Snowperson 2x6 stamp set with an alcohol-friendly black ink on a vertical A2 white cardstock panel. 
  • Create a snowperson mask. I stamped the image on masking paper and fussy cut the snowperson out. I didn't worry about masking the twig arms. 
  • Mask the snowperson and the area below the snowperson. I used Post-It tape for the area below. Blend the sky using light pink, light blue and dark blue dye inks and blending brushes. 
  • Before removing masks add splatters to the sky. I used blue opal paint.
  • Remove masks and color image with alcohol markers.
  • Stamp both sentiments from the 1 Line Snowperson 2x6 stamp set.
  • Adhere the panel to an A2 vertical card base.
  • Add black enamel dots as the eyes to finish off the card.


Thanks for visiting!

Amrita

You can find me on IG @amritapettus

For more inspiration, updates, and news check out these awesome places! 


The RHD Affiliate Disclaimer:

We want to ensure transparency and honesty in our interactions with you, our valued readers. Please be aware that the links provided on The Rabbit Hole Designs Blog may be affiliate links. This means that if you make a purchase through these links, the project designer may earn a small commission at no extra cost to you. Your support means the world to us!



We kindly request that you accept the tracking cookie for the affiliate websites. Rest assured, this will not expose your computer to viruses or compromise your information. It's a necessary step for the company to attribute the sale to the affiliate, ensuring that creators like our creatives receive their rightful commissions.


Your trust and support empower our creators to continue sharing creativity and inspiration through our blog. Thank you for being an integral part of The Rabbit Hole Designs community!











By at No comments:
Labels:
Subscribe to: Posts (Atom)